| The
acoustic panel foam grade we use is specifically formulated for acoustic
applications by one of the UK's leading specialist foam manufacturers.
it has been used for many years as the basic sound absorption
foam due to its excellent performance for a wide range of applications.
It may be used for acoustic enclosures, studio wall paneling,
air handling units (AHU's), air conducting, cab linings and just
about any other application where a controlled acoustic sound
level is required.
CNC
Profile Cut Grey acoustic panel, 25kg / m3 Density Foam which has
a controlled permeability and open cell structure that gives optimum
acoustic performance for a foam of this density.Hardness 125 to
155 Newton's
Below
is the Foams Random Incidence Sound Absorption for a flat piece
of foam cut at 25mm thick (Typical Results) Frequency (hz) to
Relative Absorption Coefficient
125Hz
0.06
250Hz 0.12
500Hz 0.33
1000Hz 0.6
2000Hz 0.72
4000Hz 0.97
Sound
dampening for small sized areas like vocal sound booths help prevent
echo and improve acoustics and give a more pure sound response.
This tile is also ideal for home recording studio applications,
home cinemas, server rooms etc. Tim
G from www.timgmusic.co.uk of mtv fame used our acoustic panel
Products in his new studio bunker7 www.bunker7.co.uk and gave
us this feedback : the foams done a really good job at making
the room dead. I've found its particularly good for vocals and
brass as it seems to soak up loads of mid and high frequencies.
and absorbs fairly low frequencies (at a guess i'd say down to
about 400hz) overall its ideal for use in a vocal isolation booth
/ instrumental booth where you want no room reflections. I was
amazed at how good a sax sounded when miced from the other side
of the room when recorded it really soaked it all up! |
