AFBT02 Bass Traps (Pack of 2 Traps)

£44.99

Availability: 4 in stock

SKU: AFBT02-2 Category:

AFBT02 Bass Traps (2 traps per pack)

If you would like a large order of bass traps please ring: 0161 620 8534 

  • 2 AFBT02 Acoustic Foam Corner Bass Traps 
  • Full NRC Test Data Avaliable ( average NRC 1.5 )
  • Ideal for recording studios – mixing rooms – vocal booths – home cinemas

Bass Trap Dimensions:

The AFBT02 Bass Trap Cleans and tightens bass response

Bass Traps work by trapping the random ‘omni-directional’ bass energy that tends to cluster in corners and overwhelm the room. They have the positive effect of reducing smear and giving bass more definition and punch, allowing you to control low frequency energy. This will help your studio to attain a tighter, more controlled bass.

From The Manufacturer – Comfortex Limited

All foam products supplied upon leaving our factory conform to the requirements of Schedule 1, part 1, of the Furniture and Furnishings (Fire) (Safety) Regulations, S.I. 1324 of 1988 (amended 1989), (Amd 1993), and are also suitable for applications requiring FMVSS302. The fatigue class is based on BS3379.

CNC Profile Cut Open Cell Melamine Treated Grey Acoustic Foam, 25kg / m3 Density Foam which has a controlled permeability and open cell structure that gives optimum acoustic performance for a foam of this density. Hardness 125 to 155 Newton’s. Please note all polyurethane foam will react to UV light and can fade and yellow over time. This however will in no way affect the foams sound absorption performance.

Noise Reduction Coefficients

Sound Absorption classes are designated A to E. Class A has the highest sound absorption and E the Lowest. In addition should also show the specified overall dept of system (o.d.s), this must always be stated for a given sound absorption class.

The ASTM standard C 423 specifies two different single values of sound absorption; the NRC (Noise Reduction Coefficient) and the SAA (Sound Absorption Average). Both values are calculated as an average over the frequency ranges (250-2000 Hz and 200-2500 Hz respectively).

But the NRC is not the whole story. It just gives an overall indication to the materials absorption properties. In the case of acoustically treating a room you may need to be more selective than this. The document where the NRC data is derived from will also show the materials absorption at many different frequency responses. This is where you can see what the material will do at the frequencies you need to tackle.

Below are the detailed independent NRC test results.

Click here for NRC data sheet – Average NRC 1.50 (150%) Class A

You may also like…

Social media & sharing icons powered by UltimatelySocial